What are the reasons why the printer nozzle can not be used normally?
添加时间：
Most of the customers will encounter some unexpected situations when they use the photo machine, especially the valuable items such as sprinklers. So what should we do when the photo machine sprinklers can not be used properly? First of all, we must understand why photo printer nozzle can not be used normally. The reasons are as follows:
1, electrostatic interference:
Too dry working environment, will directly produce a large number of static electricity, directly cause damage to the ink circuit; or in the use of printing materials, especially in the use of plastic-based materials, such as PP, backing glue medium, will also produce a large number of static electricity; damage the ink or cause impurity accumulation caused by ink plugging damage.
2, there is air in the pipeline:
The ink head of the inkjet printer is often damaged by burning because of the loosening of the contact point between the pipe and the ink head or the leakage of the ink head, which causes the ink to flow back to the left ink supply bin. If there are bubbles in the process of filling ink, the general burnout will cause short circuit, thus causing the whole set of nozzle failure. Often, too much air is injected into the cartridge to replace the ink. When the bubbles in the ink head cause insufficient ink supply, the heater will burn the heated wafer because there is not enough ink to cool it, causing damage.
3. External voltage:
External voltage is too high or unstable, which has a great impact on the print head, especially replacing the print head. It may cause the photo machine to burn the print head or not recognize the print head.
4. Ink quality:
Ink contains a variety of chemical ingredients, often due to imprecise filtration, high viscosity, moisturizing fluids and other factors, resulting in the printing head failure.
5, do not pay attention to operation and maintenance:
For Haozhiyuan series printer head, the direct cause of damage is physical damage, that is, due to the paper and other media warped edge, scratched the bottom of the printing head in the printing process of metal holes, resulting in a photo machine printer nozzle nozzle damage, and can not spray properly.
|
